您目前的位置: 首页» 科研队伍» 专职人员

顾艳红

顾艳红,1977年生,博士,教授,硕士生导师。1999年毕业于河南科技大学机械工程学院,获学士学位;2002年和2005分别中国地质大学(北京)机械设计及理论专业获硕士学位,地质工程专业获博士学位。2007年10月至2008年2月于美国明尼苏达大学接受双语教学培训,2012年于美国阿拉斯加大学机械工程专业获得第二个博士学位。2014年晋升为副教授。20179月20189月于美国纽约哥伦比亚大学工学院访问学者

主要从事摩擦学表面工程和腐蚀机理与防护等方面的研究,现为 “Corrosion Science”, “Applied Surface Science”, “Surface and Coatings Technology”和“Corrosion Engineering Science and Technology”等国际期刊审稿人。北京市和国家自然科学基金函评专家。主持国家自然科学基金青年基金1项、国家自然科学基金面上项目(合作单位)1项、北京市自然科学基金面上项目1项;发表学术论文40余篇,其中SCI/EI检索20余篇;获得国家发明专利授权1项。指导的硕士2人次获得北京市优秀毕业生,2人次获得优秀毕设论文,2人次获得国家奖学金,3人次派送到美国纽约哥伦比亚大学Villanova 大学短期访学。

 

主要科研项目:

  1. 国家自然科学基金面上项目(合作单位):科学超深井铝合金钻杆的腐蚀防护机制研究,2018-2021。

  2. 国家自然科学青年基金项目:镁表面Ca-P生物涂层在腐蚀与磨损协同作用下降解机理研究,2014-2016。

  3. 北京市自然科学基金项目:镁表面超声波冷锻/微弧氧化Ca-P涂层的生物摩擦学性能研究,2015-2017。

 

代表性学术论文

  1. Yanhong Gu*, Xinhua Zheng, Qi Liu, et al, Investigating Corrosion Performance and Corrosive Wear Behavior of Sol–gel/MAO-Coated Mg Alloy. Tribology letters, 2018. 66(3): p. 101-116

  2. Jinghua Yang, Yanhong Gu*, Xiaomao Zhou, et al., Tribocorrosion behavior and mechanism of micro-arc oxidation Ca/P coating on nanocrystallized magnesium alloys. Materials and corrosion, 2018. 69: p. 749-759.

  3. Jian Liang, Wen Yue*, Yanhong Gu*, et al, Improving Corrosion Resistance and Corrosive Wear Resistance of Aluminum Alloy Drill Pipe by Surface Nanocrystallization and Micro-arc Oxidation. Journal of Materials Engineering and Performance, 2018.

  4. Xinhua Zheng, Qi Liu, Huijuan Ma, Subhabrata Das, Yanhong Gu*, and Lei Zhang, Probing local corrosion performance of sol-gel/MAO composite coating on Mg alloy. Surface and coatings technology, 2018. 347: p. 286-296.

  5. Huijuan Ma, Yanhong Gu*, Hui Gao, Xiangdong Jiao, Juntie Che, and Qunfeng Zeng, Microstructure, Chemical Composition and Local Corrosion Behavior of a Friction Stud Welding Joint. Journal of Materials Engineering and Performance, 2018. 27(2): p. 666-676.

  6. 顾艳红*, 马慧娟, 高辉, 车俊铁, 焦向东, 田路, 16Mn钢摩擦螺柱焊接头的微观组织与局部腐蚀. 上海交通大学学报, 2017. 51(11): p. 1348-1354.

  7. Yuanhang Yang, Yanhong Gu*, Lei Zhang, Xiangdong Jiao, and Juntie Che, Influence of MAO Treatment on the Galvanic Corrosion Between Aluminum Alloy and 316L Steel. Journal of Materials Engineering and Performance, 2017. 26(12): p. 6099-6106.

  8. Huijuan Ma, Yanhong Gu*, Shujing Liu, Juntie Che, and Dawei Yang, Local corrosion behavior and model of micro-arc oxidation HA coating on AZ31 magnesium alloy. surface and coatings technology, 2017. 331(Supplement C): p. 179-188.

  9. Yanhong Gu*, Huijuan Ma, Web Yue, et al, Microstructure and corrosion model of MAO coating on nano grained AA2024 pretreated by ultrasonic cold forging technology. Journal of alloys and compounds, 2016. 681: p. 120-127.

  10. Yanhong Gu*, Lingling Chen, Wen Yue, et al, Corrosion behavior and mechanism of MAO coated Ti6Al4V with a grain-fined surface layer. Journal of alloys and compounds, 2016. 664: p. 770-776.

  11. Lingling Chen, Yanhong Gu*, Fei Chen, and Lei Zhang, Influence of HA in the electrolyte on the properties and corrosion behavior of MAO Ca/P coating. Materials and corrosion, 2016. 67(7): p. 702-709.

  12. Lingling Chen, Yanhong Gu*, Lu Liu, et al, Effect of ultrasonic cold forging technology as the pretreatment on the corrosion resistance of MAO Ca/P coating on AZ31B Mg alloy. Journal of alloys and compounds, 2015. 635: p. 278-288.

  13. 顾艳红*, 宁成云, 余遵雄, 李红龙, 熊文名, 陈玲玲, 脉冲频率对镁合金微弧氧化膜层在仿生液中耐蚀性的影响. 稀有金属材料与工程, 2014(10): p. 2463-2468.

  14. Yanhong Gu*, Xiaojun Cai, Yuanjun Guo, and Chengyun Ning, Effect of chloride ion level on the corrosion performance of MAO modified AZ31 alloy in NaCl solutions. Materials & Design, 2013. 43: p. 542-548.

  15. Yanhong Gu*, Sukumar Bandopadhyay, Cheng-fu Chen, Chengyun Ning, and Yuanjun Guo, Long-term corrosion inhibition mechanism of microarc oxidation coated AZ31 Mg alloys for biomedical applications. Materials & Design, 2013. 46(0): p. 66-75.

  16. 顾艳红, 蔡晓君, 宁成云, 熊文名, 岳文. 电压对AZ31镁合金微弧氧化涂层微观结构及腐蚀性能的影响 [J]. 中国表面工程, 2012, 25(6): 21-28. 

  17. Yanhong Gu, Sukumar Bandopadhyay, Cheng-fu Chen. Effect of oxidation time on the corrosion behavior of micro-arc oxidation produced AZ31 magnesium alloys in simulated body fluid [J]. Journal of Alloys and Compounds, 2012, 543: 109-117.

  18. Yanhong Gu, Cheng-fu Chen, Sukumar Bandopadhyay, Chengyun Ning, Corrosion mechanism and model of pulsed DC microarc oxidation treated AZ31 alloy in simulated body fluid [J]. Applied Surface Science, 2012, 258(16): 6116-6126.

  19. Yanhong Gu, Wenming Xiong, Chengyun Ning. Residual Stresses in Microarc Oxidation Ceramic Coatings on Biocompatible AZ31 Magnesium Alloys [J]. Journal of Materials Engineering and Performance, 2012, 21(6): 1085-1090.

  20. Yanhong Gu, Cheng-fu Chen, Sukumar Bandopadhyay. Residual stress in pulsed dc microarc oxidation treated AZ31 alloy [J]. Surface Engineering, 2012, 28(7): 498-502.

 

研究方向

1. 焊接接头的腐蚀机理与防护

2. 海洋平台中运动部件在海水中的腐蚀磨损研究

3. 管道的冲蚀磨损性能研究

 

 

1